MCR Safety Cut Pro CT1007NF Nitrile Foam Palm Coated Work Gloves
Constructed from a cut-resistant Cut Pro liner, with nitrile foam coating on the palm and fingers, the MCR Safety Cut Pro CT1007NF Nitrile Foam Palm Coated Work Gloves provide good protection against mechanical hazards and provide a high level of grip in dry, wet and oily conditions. As a result, these work gloves are suitable for a wide range of applications, including construction, automotive work, metal fabrication, carpentry and printing.
Key Information
- Glove Code: CT1007NF
- EN 388:2003 Rating: 4343
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the MCR Safety Cut Pro CT1007NF Gloves
The Cut Pro CT1007NF Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 3 |
Tear Resistance | Level 4 |
Puncture Resistance | Level 3 |
Uses of the MCR Safety Cut Pro CT1007NF Gloves
Providing good protection against mechanical hazards and enabling excellent grip in wet, dry and oily conditions, the Cut Pro CT1007NF are suitable for a wide array of applications, including (but not limited to):
- Aerospace
- Automotive
- Carpentry
- Construction
- Glass
- Metal fabrication
- Printing
- Rail
- Steel
- Transportation
- Tyre manufacturing
Key Features of the MCR Safety CT1007NF Work Gloves
- Cut Pro cut-resistant lining with nitrile-foam-coated palm
- Excellent grip in wet, dry and oily conditions
- Lightweight design ensures user comfort
- Good dexterity and tactile sensitivity
- Excellent resistance to abrasion and tear
Sizing of the MCR Safety CT1007NF Work Gloves
The Cut Pro Nitrile Foam Palm Coated Work Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Palm Circumference (mm) | Palm Length (mm) | Minimum Total Length of the Gloves (mm) |
Size 7 | 178mm | 170mm | 230mm |
Size 8 | 203mm | 182mm | 240mm |
Size 9 | 229mm | 192mm | 250mm |
Size 10 | 254mm | 204mm | 260mm |
Materials of the MCR Safety Cut Pro CT1007NF Gloves
- Shell Material: Cut Pro
- Coating: Nitrile Foam
Conformity Statement
Please click the PDF link below to view the conformity statement for these gloves: