MCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work Gloves
  Zoom
MCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work GlovesMCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work GlovesMCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work Gloves

MCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work Gloves

  (1 Review)
  • Kevlar liner with nitrile-foam-coated palm
  • Excellent resistance to abrasion, cut and tear
  • Good grip in wet, dry and oily conditions
  • Price is per pair of gloves
  
In stock now  

In stock now

Our Price:  £7.65(Exc VAT)£9.18 (inc 20% VAT)

Brand:  MCR Safety
Cut Resistance Level:  Level 3
Standard:  EN 388

MCR Safety

MCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work Gloves

Constructed from strong Kevlar fibres, the MCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work Gloves offer exceptional resistance to abrasion, cut and tear, and with their nitrile-coated palms, provide excellent grip in dry, wet and oily conditions. As a result, these gloves are suitable for a wide array of tasks, including automotive repair, construction, oil operations, assembly and forestry.

Key Information

  • Glove Code: CT1017NF
  • EN 388:2003 Rating: 4543
  • Size Range: 7 - 10
  • Supplied as a pair

Resistance of the MCR Safety Kevlar Nitrile Foam Coated Work Gloves

The Cut Pro CT1017NF Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below: 

EN 388

Property Resistance Level
Abrasion Resistance Level 4
Cut Resistance Level 5
Tear Resistance Level 4
Puncture Resistance Level 3

Uses of the MCR Safety Cut Pro Work Gloves

The MCR Safety Cut Pro CT1017NF Kevlar Nitrile Foam Coated Work Gloves are suitable for a wide range of applications, including (but not limited to):

  • Aerospace
  • Assembly
  • Automotive
  • Construction
  • Forestry
  • Gas
  • Glass
  • Law enforcement
  • Oil
  • Petroleum
  • Steel

Key Features of the CT1017NF Kevlar Nitrile Foam Coated Gloves

  • Strong, yet lightweight cut-resistant Kevlar liner
  • Nitrile-coated palms for increased mechanical resistance
  • Excellent resistance to abrasion, cut and tear
  • Good grip in wet, dry and oily conditions
  • Good dexterity, comfort and tactile sensitivity

Sizing of the Cut Pro CT1017NF Work Gloves

The Cut Pro CT1017NF Kevlar Nitrile Foam Coated Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Indications of Where to Measure Your Hand

Size Palm Circumference (mm) Palm Length (mm) Minimum Total Length of the Gloves (mm)
Size 7 178mm 170mm 230mm
Size 8 203mm 182mm 240mm
Size 9 229mm 192mm 250mm
Size 10 254mm 204mm 260mm

Materials of the MCR CT1017NF Kevlar Gloves

  • Shell Material: Kevlar
  • Coating: Nitrile Foam

Conformity Statement

Please click the PDF link below to view the conformity statement for these gloves:

Conformity Statement

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
MCR Safety Cut Pro CT1017NF Review
07 January 2023  | 

Good quality materials, have used a few times but need to use for longer to rate their durability. Would be better if front of hand had protective coating as well

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1 - 3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays). Orders placed before 14:00 on a working day are usually dispatched on the same day; for orders outside of this time frame, they will be dispatched on the next working day.

Please contact our Customer Care Team on 020 7501 0597 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE*

*Please note that some orders going to non-mainland UK or the Scottish highlands may be subject to a delivery surcharge. 

Related Products
MCR Safety CT1014NF Cut-Resistant Kevlar Nitrile Foam Work Gloves

MCR Safety CT1014NF Cut-Resistant Kevlar Nitrile Foam Work Gloves

£8.57 inc. VAT
In stock now  In stock now
  • Kevlar and nitrile foam gloves with exceptional resistance to cut, abrasion and tear
  • Nitrile foam coating enables great grip in wet, dry and oily conditions
  • Suitable for the glass, automotive, steel and construction industries
  • Price is per pair of gloves
MCR Safety Cut Pro CT1007NF Nitrile Foam Palm Coated Work Gloves

MCR Safety Cut Pro CT1007NF Nitrile Foam Palm Coated Work Gloves

£4.65 inc. VAT
In stock now  In stock now
  • Cut-resistant liner with nitrile foam palm coating
  • Excellent grip in wet, dry and oily conditions
  • Good dexterity, tactile sensitivity and comfort
  • Price is per pair of gloves
MCR Safety Cut Pro CT1007NF3 Nitrile Foam Fully-Coated Work Gloves

MCR Safety Cut Pro CT1007NF3 Nitrile Foam Fully-Coated Work Gloves

£4.49 inc. VAT
In stock now  In stock now
  • Ideal for protecting against medium cut risks
  • Nitrile foam coating gives great grip in wet, dry and oily conditions
  • Suitable for the glass, automotive, steel and construction industries
  • Price is per pair of gloves
MCR Safety Cut Pro CT1017PU PU Palm-Coated Work Gloves

MCR Safety Cut Pro CT1017PU PU Palm-Coated Work Gloves

£6.16 inc. VAT
In stock now  In stock now
  • Kevlar liner with polyurethane-coated palm
  • Outstanding resistance to abrasion, cut and tear
  • Excellent dexterity and tactile sensitivity
  • Price is per pair of gloves