MCR Safety General Purpose GP1002NF Nitrile Foam Palm-Coated Work Gloves
The MCR Safety General Purpose GP1002NF Nitrile Foam Palm-Coated Work Gloves are general purpose work gloves constructed from a polyester shell with a nitrile foam coating on the palm for enhanced protection against mechanical hazards. Providing a high level of grip in wet, dry and oily conditions, these gloves are suitable for an array of tasks, including automotive work, construction, assembly, manufacturing and equipment maintenance.
Key Information
- Glove Code: GP1002NF
- EN 388:2016 Rating: 3131X
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the MCR Safety General Purpose GP1002NF Palm-Coated Work Gloves
The GP1002NF Nitrile Foam Palm-Coated Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 1 |
| ISO Cut | Level X |
Uses of the MCR Safety GP1002NF Nitrile Foam Work Gloves
Providing good grip in wet, dry and oily conditions, the GP1002NF Gloves are suitable for a wide range of applications, including (but not limited to):
- Aerospace
- Assembly
- Automotive
- Construction
- Maintenance
- Manufacturing
Key Features of the MCR GP1002NF Palm-Coated Work Gloves
- Constructed from a polyester shell with coated palm
- Nitrile foam palm coating for increased resistance
- Excellent grip in wet, dry and oily conditions
- Lightweight design enables good dexterity
Sizing of the General Purpose GP1002NF Work Gloves
The MCR Safety General Purpose GP1002NF Nitrile Foam Palm-Coated Work Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Palm Circumference (mm) | Palm Length (mm) | Minimum Total Length of the Gloves (mm) |
| Size 7 | 178mm | 170mm | 230mm |
| Size 8 | 203mm | 182mm | 240mm |
| Size 9 | 229mm | 192mm | 250mm |
| Size 10 | 254mm | 204mm | 260mm |
Materials of the GP1002NF Nitrile Foam Palm-Coated Work Gloves
- Shell Material: Polyester
- Coating: Nitrile foam
Conformity Statement
Please click the PDF link below to view the conformity statement for these gloves:
