MCR CT1071 Lightweight Graphene Fibre Gloves (Dark Blue)
Made from dynamic Graphene Fibre, the MCR CT1071 Lightweight Graphene Fibre Gloves are designed to prioritise the wearer's comfort and hygiene without sacrificing safety and productivity. Demonstrating impressive "Level E" cut resistance under European standardised testing, these gloves can also boast a powerful grip and impressive all round resistance to workplace hazards.
Key Information
- Glove Product Codes
- Size 6: CT1071NM1ADB06
- Size 7: CT1071NM1ADB07
- Size 8: CT1071NM1ADB08
- Size 9: CT1071NM1ADB09
- Size 10: CT1071NM1ADB10
- Size 11: CT1071NM1ADB11
- Size 12: CT1071NM1ADB12
- EN 388: 4X42E
- Available Size Range: 6-12
- Supplied as a pair
Sizing
The MCR CT1071 Gloves are available in 7 different sizes. To find the best size for you, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
| Size 12 | Over 279mm | Over 215mm |
Resistance of the MCR Lightweight Graphene Fibre Gloves
EN 388
The MCR Black Utility Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 2 |
| ISO Cut Resistance | Level E |
Uses of the MCR Blue Graphene Fibre Gloves
These gloves produce exceptional levels of protection and safety. As the testing scores above show, they demonstrate maximum resistance against abrasions and tearing, along with extremely high cut resistance. The nitrile foam coating gives the wearer a powerful grip which is suited to working in dry, wet and oily conditions. These factors result in a glove that is used in a wide range of applications:
- Automotive
- Equipment
- Assembly
- Metal Fabrication
- Steel
- Manufacturing
- Aerospace
- Sheet Metal Handling
- Machinist
- Maintenance
- Construction
- Engineering
- Warehouse
- Scaffolding
- Oil Handling
Key Features and Benefits
- EN 388 test results demonstrate maximum resistance against abrasions and tearing
- Innovative Graphene fibre construction is ultra lightweight: 25% lighter than comparable gloves
- Nitrile Micro-Foam coating produces a superb grip and outstanding cut protection
- Glove characteristics perform well even in wet and oily conditions
- Moisture-wicking construction pulls sweat and moisture away from skin
- Treated with anti-bacterial agent for hygiene and prevent odour
- Luxurious and smooth to wear
Additional Documentation
