Ejendals Tegera Infinity 8803 3/4 Dipped Medium Handling Gloves
With the Ejendals Tegera Infinity 8803 3/4 Dipped Medium Handling Gloves you won't have to trade protection for comfort. Combining the quality synthetic materials with Ejendals' design expertise, these anatomically designed gloves are flexible, comfortable and highly protective.
Key Information
- Glove Code: 8803
- EN 388:2003 Rating: 4121
- EN 407:2004 Rating: X1XXXX
- EN 420:2003
- Size Range: 7 - 11
- Supplied as a pair
Resistance of the Ejendals Infinity 8803 Medium Handling Gloves
The Infinity 8803 3/4 Dipped Medium Handling Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
EN 407
| Property | Resistance Level |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Molten Metal Resistance (Splashes) | N/A |
| Molten Metal Resistance (Large Quantities) | N/A |
Uses of the Tegera Infinity 8803 3/4 Dipped Gloves
The Infinity 8803 3/4 Dipped Gloves are water and oil-repellent gloves that can be used for most light to medium-work tasks. They are suitable for the following applications:
- Airport work
- Assembly
- Building and construction
- Carpentry
- Engineering
- HVAC (Heating, ventilation and air conditioning) installation
- Installation
- Machine driving
- Machine operation
- Repairs
- Servicing
- Shop work
- Transportation
- Warehouse duties
The Infinity 8803 3/4 Dipped Medium Handling Gloves are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks.
Features of the Infinity 8803 3/4 Dipped Gloves
- Three-quarter dipped for excellent oil and grease resistance
- Withstand contact heat of up to 100°C
- Anatomically designed for an ultra-comfortable fit
- Machine washable at 40°C
- Provide protection against:
- Abrasion injuries
- Blisters
- Chapping
- Contact with dirt
- Contact with moisture
- Contact with oil and fat
- Drying out
- Grazes
- Lacerations
- Scratches
Three-Quarter Coating
The Ejendals Tegera Infinity 8803 feature palms that are 3/4 dipped in nitrile and then a mixture of nitrile foam and water-based polyurethane, and finished with a foam grip pattern. This makes the glove highly oil and grease resistant, which is ideal for handling tasks involving oily components or machinery. At the same time, the lower back and cuff area of the glove remain uncoated for better ventilation and user comfort.
Moderate Heat Resistance
The Tegera Infinity 8803 Work Gloves are able to withstand contact heat up to 100°C. While this is not enough to resist sustained high temperatures, it does provide peace of mind for mechanical or assembly line work.
Sizing of the Ejendals Tegera 8803 Gloves
The Tegera Infinity 8803 Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Materials of the Ejendals Tegera 8803
- Liner Material: Nylon, spandex, 18gg
- Dipping: 3/4 dipped, double-dipped
- Dipping Material: Nitrile, nitrile foam/water-based polyurethane
- Grip Pattern: Foam grip pattern
- Material Specification: Nitrile, nylon, elastane
Documentation for the Ejendals Tegera Infinity 8803 Gloves
| Conformity Statement | Instructions for Use |
 | |
