Ejendals Tegera Infinity 8801 Palm Dipped Handling Gloves
A search for working gloves that would provide both outstanding protection and comfort often forces you to give up either one or the other. With the Ejendals Tegera Infinity 8801 Palm Dipped Handling Gloves you won't have to make any compromises, as their combination of quality synthetic materials and Ejendals' design expertise makes them as flexible as they are protective.
Key Information
- Glove Code: 8801
- EN 388:2003 Rating: 4121
- EN 407:2004 Rating: X1XXXX
- EN 420:2003
- Size Range: 6 - 11
- Supplied as a pair
Resistance of the Ejendals Infinity 8801 Palm Dipped Handling Gloves
The Infinity 8801 Palm Dipped Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
EN 407
| Property | Resistance Level |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Molten Metal Resistance (Splashes) | N/A |
| Molten Metal Resistance (Large Quantities) | N/A |
Uses of the Tegera Infinity 8801 Palm Dipped Handling Gloves
The Infinity 8801 Handling Gloves are water and oil repellent gloves that can be used for most light to medium-work tasks. They are suitable for the following applications:
- Airport work
- Building and construction
- Carpentry
- Engineering
- Fine assembly
- HVAC (Heating, ventilation and air conditioning) installation
- Installation
- Machine driving
- Machine operation
- Repairs
- Servicing
- Shop work
- Transportation
- Warehouse duties
The Infinity 8801 Handling Gloves are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks.
Features of the Infinity 8801 Gloves
- Feature water and oil repellent palms
- Withstand contact heat of up to 100°C
- Anatomically designed for an ultra-comfortable fit
- Machine washable at 40°C
- Provide protection against:
- Abrasion injuries
- Blisters
- Chapping
- Contact with dirt
- Contact with oil and fat
- Drying out
- Grazes
- Lacerations
- Scratches
Nitrile Foam Dipped Palm
The palms of Infinity 8801 Handling Gloves have been dipped in a mixture of nitrile foam and water-based polyurethane, and then finished with a foam grip pattern. This makes the palms water and oil repellent, which is ideal for use in a variety of oily, greasy or wet environments.
Moderate Heat Resistance
The Tegera Infinity 8801 Work Gloves are able to withstand contact heat up to 100°C. While this is not enough to resist sustained high temperatures, it does provide peace of mind for mechanical or assembly line work.
Sizing of the Tegera Infinity 8801Gloves
The Tegera Infinity 8801 Gloves are available in six sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Materials of the Ejendals Tegera 8801
- Liner Material: Nylon, spandex, 15gg
- Dipping: Palm-dipped
- Dipping Material: Nitrile foam/water-based polyurethane
- Grip Pattern: Foam grip pattern
- Material Specification: Nitrile, nylon, elastane
Documentation for the Ejendals Tegera Infinity 8801 Gloves
| Conformity Statement | Instructions for Use |
 | |
