Ejendals Tegera 19 Heavy Duty Welding Gloves
The high temperatures involved in welding can put the hands at risk of serious injury if robust protection isn't worn. At the same time, a high level of dexterity is required for most welding tasks, so welding gloves must not be too bulky.
Made from split-grain cowhide of the highest quality, the Ejendals Tegera 19 Heavy Duty Welding Gloves provide great grip and flexibility as well as a very high level of protection. A full lining of jersey helps to ensure comfort while an extended safety provides extra protection for the wrist area.
- Glove Code: 19
- EN 388:2003 Rating: 3143
- EN 407 Rating: 41324X
- EN 420
- EN 12477: Type A (high protection)
- EN 1149-2: R:26,138x10⁶Ω
- Size Range: 8 - 11
- Supplied as a pair
Resistance of the Ejendals Tegera 19 Heavy Duty Welding Gloves
The Ejendals Tegera 19 Heavy Duty Welding Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
|Contact Heat Resistance
|Convective Heat Resistance
|Radiant Heat Resistance
|Molten Metal Resistance (Splashes)
|Molten Metal Resistance (Large Quantities)
Uses of the Ejendals Tegera 19 Heavy Duty Welding Gloves
With a heat-resistant design that withstands welding sparks and grinding splashes, the Ejendals 19 are ideal for welding and hot work within a variety of industries. Typical applications include:
- Hot work
- Metal fabrication
The Ejendals Tegera 19 Heavy Duty Welding Gloves are designated Category II gloves, meaning they are suitable for medium-duty tasks and intermediate risks.
Key Features of the Ejendals Tegera 19 Heavy Duty Welding Gloves
- Heat-resistant welding gloves
- Highly resistant split-grain cowhide palm and back
- Reinforced seams for improved durability
- Resists contact heat up to 100°C
- Withstands welding sparks and grinding splash
- Good fingertip sensitivity for fine handling
- Extended safety cuff for wrist protection
- Provides protection against:
- Abrasion injuries
- Burn injuries
- Heat injuries
The Ejendals Tegera 19 are made from split-grain cowhide leather. Split-grain leather has a coarser surface for better grip, heat-insulating properties and flexibility regardless of its thickness.
The Ejendals Tegera 19 feature seam reinforcement. This improves durability and helps to ensure the gloves do not split apart or burn at the seams.
Reinforced seams for improved durability
Sizing of the Ejendals Tegera 19 Heavy Duty Welding Gloves
The Ejendals Tegera 19 Heavy Duty Welding Gloves are suppplied in four different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Please note that the Tegera 19 are hardwearing, heavy-duty gloves that should have a slightly looser fit than most models. These gloves feature a palm thickness of between 1.2mm and 1.4mm.
Materials of the Tegera 19 Welding Gloves
- Palm Material: Split cowhide of top quality
- Back Material: Split cowhide of top quality
- Outer Material Specification: Leather, natural latex
- Inner Material Specification: Cotton
Documentation for the Ejendals Tegera 19 Welding Gloves
|Instructions for Use