Ejendals Tegera 130A Kevlar Welding Gloves

The high temperatures involved in all types of welding can put the hands at risk of serious injury if robust protection isn't worn. At the same time, a high level of dexterity is required for most welding tasks, so welding gloves mustn't be too bulky in order to be effective.

The Ejendals Tegera 130A Kevlar Welding Gloves feature a full high-quality leather construction with Kevlar-reinforced seams to achieve the best levels of heat resistance. Able to withstand welding sparks and grinding splash, these rugged gloves are perfect for heavy-duty welding tasks.

Key Information

• Glove Code: 130A
• EN 388:2003 Rating: 3111
• EN 407 Rating: 412X4X
• EN 420
• EN 12477: Type B (high dexterity)
• EN 1149-2: R:11.09x10⁶Ω
• Size Range: 6 - 11
• Supplied as a pair

Resistance of the Ejendals Tegera 130A Kevlar Welding Gloves

The Ejendals Tegera 130A Welding Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:

EN 388

EN 407

Uses of the Ejendals Tegera 130A Kevlar Welding Gloves

With a heat-resistant design and reinforced seams, the Ejendals 130A are ideal for welding and hot work within a variety of industries. Typical applications include:

• Automotive
• Engineering
• Hot work
• Metalwork
• Mining
• Oil and gas
• Petrochemicals
• Welding

The Ejendals Tegera 130A Welding Gloves are designated Category II gloves, meaning they are suitable for medium-duty tasks and intermediate risks.

Key Features of the Ejendals Tegera 130A Kevlar Welding Gloves

• Heat-resistant welding gloves
• Supple goatskin palm and back for fantastic dexterity
• Kevlar seam thread for optimal heat resistance
• Flame-retardant, resists welding sparks and grinding splash
• Extended leather safety cuff for wrist protection
• Resists contact heat up to 100°C
• Provides protection against:
  • Abrasion injuries
  • Burn injuries
  • Blisters
  • Grazes
  • Heat injuries
  • Lacerations
  • Scratches

Kevlar Seams

The seams of the Ejendals Tegera 130A Welding Gloves contain heat-resistance Kevlar thread. This allows them to resist 427°C of short-term heat exposure (maximum operating limit) and 204°C of longer-term heat exposure (constant operating limit). They are also flame retardant and able to withstand welding sparks and grinding splash.

Kevlar seam thread for durability and protection

Sizing of the Ejendals Tegera 130A Kevlar Welding Gloves

The Ejendals Tegera 130A Welding Gloves are supplied in six different sizes, meaning they should be suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Please note that the Tegera 130A are hardwearing, medium-duty gloves that should have a slightly looser fit than typical safety gloves. These gloves feature a palm thickness of between 0.7mm and 0.8mm.

Materials of the Tegera 130A Welding Gloves

• Palm Material: Full grain goatskin of top quality
• Back Material: Full grain goatskin of top quality
• Material Specification: Leather, natural latex

Documentation for the Ejendals Tegera 130A Welding Gloves

Conformity Statement	Instructions for Use

Ejendals Sustainability Goals

Here at WorkGloves.co.uk we take pride in sourcing sustainable and environmentally friendly suppliers. Ejendals are no different, with a company policy that puts being part of a global community at its heart. This policy includes not just a focus on reducing carbon emissions, increasing recycling and minimising waste, but working to reduce the impact of solvents used in gloves based on the current knowledge available.

A Focus on a Better World

Ejendals want to limit their environmental impact in order to make the world better for future generations. Their work includes:

• Imposing environmental requirements on those who deliver products, packaging and services
• Reducing the amount of chemicals used in the manufacturing process
• Ensuring that staff are educated on the impact of the materials used
• Manufacturing high quality products to ensure less waste
• Ship as much as possible to reduce aeroplane emissions
• Minimising waste and recycling materials

Ejendals are also certified in accordance with environmental management system ISO 14001. For a full breakdown of their sustainability goals, see the link below:

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 0597 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.