Ejendals Tegera 126A Welding Gloves
The high temperatures involved in all types of welding can put the hands at risk of serious injury if robust protection isn't worn. At the same time, a high level of dexterity is required for most welding tasks, so welding gloves mustn't be too bulky in order to be effective.
The Ejendals Tegera 126A Welding Gloves provide the optimal balance of protection and dexterity, with a 100% high-quality leather composition. With a reinforced index finger and seams, the 126A Welding Gloves are highly durable, making them ideal for work in intense industrial environments.
Key Information
- Glove Code: 126A
- EN 388:2003 Rating: 2111
- EN 407 Rating: 412X4X
- EN 420
- EN 12477: Type B (high dexterity)
- EN 1149-2: R: 2.55 x 10⁵Ω
- Size Range: 7 - 11
- Supplied as a pair
Resistance of the Ejendals Tegera 126A Welding Gloves
The Ejendals Tegera 126A Welding Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 1 |
| Puncture Resistance | Level 1 |
EN 407
| Property | Resistance Level |
| Burning Resistance | Level 4 |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | Level 2 |
| Radiant Heat Resistance | N/A |
| Molten Metal Resistance (Splashes) | Level 4 |
| Molten Metal Resistance (Large Quantities) | N/A |
Uses of the Ejendals Tegera 126A Welding Gloves
With a heat-resistant design and reinforced seams, the Ejendals 126A are ideal for welding and hot work within a variety of industries. Typical applications include:
- Automotive
- Engineering
- Hot work
- Metalwork
- Mining
- Oil and gas
- Petrochemicals
- Welding
The Ejendals Tegera 126A Welding Gloves are designated Category II gloves, meaning they are suitable for medium-duty tasks and intermediate risks.
Key Features of the Ejendals Tegera 126A Welding Gloves
- Heat-resistant welding gloves
- Supple goatskin palm and back for fantastic dexterity
- Good fingertip sensitivity for fine handling
- Extended leather safety cuff for wrist protection
- Resists contact heat up to 100°C
- Provides protection against:
- Abrasion injuries
- Burn injuries
- Blisters
- Contact with dirt
- Grazes
- Heat injuries
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 126A Welding Gloves
The Ejendals Tegera 126A Welding Gloves are supplied in five different sizes, meaning they should be suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Please note that the Tegera 126A are hardwearing, medium-duty gloves that should have a slightly looser fit than typical safety gloves. These gloves feature a palm thickness of between 0.7mm and 0.8mm.
Materials of the Tegera 126A Welding Gloves
- Palm Material: Full grain goatskin of top quality
- Back Material: Full grain goatskin of top quality
- Material Specification: Leather (99%), natural latex (1%)
Documentation for the Ejendals Tegera 126A Welding Gloves
| Conformity Statement | Instructions for Use |
 | |
