Warrior Protects DWGL045 Nitrile Coated Reinforced Grip Gloves
The Warrior Protects DWGL045 Nitrile Coated Reinforced Grip Gloves are a quality pair of gloves designed to protect your hands during a range of warehousing and sheet metal handling tasks. The glass and HPPE liner provide a good level of cut resistance to reduce the risk of injury, while the nitrile palm coat improves grip to reduce the risk of slippage and accidents. To ensure a durable design, these gloves also feature a nitrile crotch reinforcement.
Key Information
- Product Codes:
- DWGL045-7
- DWGL045-8
- DWGL045-9
- DWGL045-10
- EN388: 4X42C
- Available Sizes: 7 - 10
- Pair of gloves
Resistance of the Reinforced Gloves
EN 388 (Mechanical Resistance)
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 2 |
| ISO Cut Resistance | Level C |
Uses of the Warrior Protects Gloves
These quality grip gloves are ideal for use in a range of industrial environments for a range of job tasks including (but not limited to):
- Manual Handling
- Sheet Metal Handling
- Metal Fabrication
- Shipping (Loading/Unloading)
- Warehousing
- Maintenance
- Automotive
Key Features and Benefits
- Pair of black and orange grip gloves
- Constructed with a 13-gauge HPPE and glass liner
- Ideal for use during sheet metal handling and warehousing tasks
- Perfect for protecting your hands when working with sharp or coarse materials
- Provides a good level of cut resistance to minimise the risk of wounds and lacerations
- Features a palm coat of sandy nitrile to improve the grip
- Nitrile crotch reinforcement enhances durability to ensure long-lasting protection
- Available in four different sizes
Sizing Information for the Palm Coated Gloves
These Warrior Protects gloves are supplied in four sizes. If you're not sure which size is right for you, measure the length of your hand and the circumference of your palm at the knuckle, excluding the thumb (as seen below). Once you have these measurements, compare them to the below sizing table to determine the best fit for your hands.
| Size | Palm Circumference | Hand Length |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Alternative Warrior Protects Gloves
If you're looking for an alternative pair of gloves, check out the Warrior Protects DWGL030 Impact Resistant Cut Protection Gloves. These gloves offer the same level of abrasion resistance and include a sandy nitrile coat for improved grip, but also offer a higher level of cut protection, and impact resistance. The DWGL030 model also features a Velcro wrist strap.
Designed with Nitrile
The Warrior Protects DWGL045 feature a sandy nitrile palm coat which improves the glove's grip on a range of materials. Nitrile is also used for crotch reinforcement on the glove, ensuring a durable design that offers long-lasting protection.
Materials
- Liner: HPPE and Glass
- Coat: Nitrile
Additional Documents
