Uvex Phynomic C3 Cut Protection Gloves
Handling small components requires excellent grip and dexterity, which may be difficult when you're wearing bulky protective gloves. The Uvex Phynomic C3 Cut Protection Gloves are designed with a foam coating on the palms and fingertips to improve your grip in dry and damp areas, while their thin and lightweight construction makes them perfect even for fine handling.
Key Information
- Glove Code: 60080
- EN 388:2003 Rating: 4343
- EN 420:2003
- Size Range: 6 - 11
- Supplied as a pair
Resistance of the Uvex Phynomic C3 Cut Protection Gloves
The Uvex Phynomic C3 Cut Protection Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 3 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
Uses of the Phynomic C3 Cut Protection Gloves
Designed to help you retain as much sensitivity as you need to do your job well, the Phynomic C3 Cut Protection Gloves are ideal for a range of tasks. With their good grip in both dry and slightly damp areas, these gloves are perfect for:
- Assembly work
- Component handling
- Food processing
- Inspection
- Packaging
- Precision work
- Product work
- Product inspection
- Sorting
Features of the Phynomic C3 Cut Protection Gloves
- Ideal for tasks that require a high degree of touch sensitivity
- Highly resistant against a range of mechanical tasks
- Approved to be safe for handling foodstuffs
- Foam coating on palms and fingertips to improve grip
- Offer a perfect fit with 3D Ergo technology
- Approved by proDerm dermatologists to prevent dermatitis
- Skin tolerant and free from pollutant for safety
- Suitable for both dry and damp environments
Highly Breathable and Comfortable Design
Breathable design for prolonged use
The aqua-polymer foam coating on palms and fingertips makes the Phynomic C3 Cut Protection Gloves highly breathable while improving their grip. This helps to ensure your remain comfortable throughout use, even when working for prolonged periods of time.
Sizing of the Uvex Phynomic C3 Cut Protection Gloves
The Uvex Phynomic C3 Cut Protection Gloves are available in six sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Documentation for the Uvex Phynomic C3 Cut Protection Gloves
| Conformity Statement | Instructions for Use |
 | |
