TraffiGlove TG5130 Kinetic Cut Level 5 Heat Resistant Safety Gloves
For excellent heat resistance that retains dexterity, there are not many better fibres than Aramid for the job. The TraffiGlove TG5130 Kinetic Cut Level 5 Heat Resistant Safety Gloves use an Aramid liner to provide 100°C heat resistance, while also providing flexibility and outstanding mechanical protection. Ideal for hot surface contact, these gloves provide the comfort, dexterity and sensitivity for extended use.
Key Information
- Glove Codes: TG5130
- EN 388:2003 Rating: 3543
- EN 407:2004 Rating: 4131XX
- EN 420:2003
- Size Range: Extra Small - XX-Large
- Supplied as a pair
Resistance of the TraffiGlove TG5130 Kinetic Cut Level 5 Heat Resistant Gloves
The TraffiGlove Achieve Polyurethane Cut Level Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 5 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
EN 407
| Property | Resistance Level |
| Burning Behaviour | Level 4 |
| Contact Heat | Level 1 |
| Convective Heat | Level 3 |
| Radiant Heat | Level 1 |
| Small Splashes of Molten Metal | N/A |
| Large Splashes of Molten Metal | N/A |
Uses of the TraffiGlove TG5130 Kinetic Cut Heat Resistant Gloves
Despite their high heat resistance and impressive mechanical protection, the TraffiGloves TG5130 retain versatility and dexterity, making them suitable for a wide range of environments. They are suitable for use inside and outside, in clean conditions and in dry and oily working conditions. Some applications where these gloves are recommended include:
- Hot surface contact
- Oil and gas industries
- Automotive
- Assembly
- Metal work
- Fabrication
- Waste and recycling
- Steelwork
- Engineering
- Metal handling
Key Features of the TG5130 Level 5 Heat Resistant Gloves
- Aramid fibres provide excellent 100°C heat protection
- Tight fitting design ensures flexibility and dexterity
- Aramid ensures fantastic level 5 cut resistance
- Outstanding abrasion resistance ensures durability
- Fitted with a Cohesion Crystal coating that enhances grip
- Tough fibres ensure oil resistant qualities
- High tear and puncture resistance ideal for providing hand protection
- Available in six sizes that should suit most users
Sizing of the Kinetic Cut Level 5 Heat Resistant Safety Gloves
The TraffiGlove Heat Resistant Gloves are available in six sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Conformity Statement
