Portwest Waterproof Cut-Resistant Nitrile Foam Gloves AP50
Offering a rough sandy finish that ensures total protection against most liquids, the Portwest Waterproof Cut-Resistant Nitrile Foam Gloves AP50 promise to perform exceptionally well in applications that demand high cut protection. A resistance to oils and liquids is supported by a lightweight, flexible and sensitive liner, meaning that the user has total control when handling materials.
Key Information
- Glove Codes:
- AP50B8RS
- AP50B8RM
- AP50B8RL
- AP50B8RXL
- AP50B8RXXL
- EN 388:2003 Rating: 4444C
- EN 420
- Size Range: 7 - 11
- Supplied as a pair
Resistance of the Portwest Waterproof Cut-Resistant Gloves AP50
The Portwest Waterproof Cut-Resistant Nitrile Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 4 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 4 |
| ISO Cut Resistance | Level C |
Uses of the Portwest Waterproof Nitrile Foam Gloves
Best suited to use in slippery, wet and oily conditions, the Portwest Nitrile Waterproof Gloves ensure hands are protected from cuts at all times. They are versatile and can be used inside and outside, in clean and dirty conditions and in dry environments too. They are recommended for some of the following industries:
- Assembly
- Automotive
- Building
- Can handling
- Ceramics
- Construction
- DIY
- Electronics
- Glass
- Industrial work
- Local authorities
- Machinist
- Maintenance
- Mechanics
- Oil and gas
- Packaging
- Packing
- Product inspection
- Railway maintenance
- Scaffolding
- Slaughterhouse
- Slicing
- Steel sheet handling
- Utilities
Key Features of the Portwest Waterproof Cut-Resistant Nitrile Foam Gloves
- Fitted with a tight 13 gauge liner that enhances sensitivity
- Offers total protection against most liquids, oils and greases
- Tough nitrile liner ensures exceptional level 4 cut resistance
- Flexible design makes gloves ideal for dexterous work
- Features a sandy nitrile finish that works to enhance grip
- Supplied with a reinforced thumb crotch for extra protection
- Impressive abrasion resistance means gloves are durable
- Available in a wide range of sizes
Sizing of the Portwest Cut-Resistant Nitrile Gloves
The Portwest Waterproof Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Documentation for the Portwest Waterproof Nitrile Foam Gloves AP50
