Portwest Cut-Resistant Lightweight HPPE Gloves A630
Ideal for hot and dirty industrial applications such as foundry, glass handling and fabrication, the Portwest Cut-Resistant Lightweight HPPE Gloves A630 use a thick leather palm to offer reinforced abrasion resistance and grip. This is supported by a resistance to contact temperatures of up to 250°C, while an inner liner provides comfort making them perfect for extended use.
Key Information
- Glove Codes:
- A630G7RM
- A630G7RL
- A630G7RXL
- EN 388:2003 Rating: 4442D
- EN 407:2004 Rating: X2XXXX
- EN 420
- Size Range: 8 - 10
- Supplied as a pair
Resistance of the Portwest Cut-Resistant HPPE Gloves A630
The Portwest Cut-Resistant Lightweight Gloves A630 have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 4 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 2 |
| ISO Cut Resistance | Level D |
EN 407
| Property | Level of Resistance |
| Burning | N/A |
| Contact Heat | Level 2 |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Molten Metal (Small Splashes) | N/A |
| Molten Metal (Large Splashes) | N/A |
Uses of the Portwest Cut-Resistant HPPE Gloves A630
Tough, hard-wearing and resilient, the Portwest Lightweight HPPE Gloves are well suited to use in dirty, indoor industrial environments. They aren't limited to this, however, as they can be used inside and outside, with heat, and in dry work conditions. Some applications where these gloves are recommended include:
- Assembly
- Automotive
- Building
- Can handling
- Ceramics
- Construction
- Electronics
- Engineering
- Fabrication
- Foundry
- General handling
- Glass handling
- Industrial work
- Local authorities
- Machinist
- Mechanics
- Maintenance
- Materials handling
- Metal handling
- Oil and gas
- Railway maintenance
- Sheet steel handling
- Transportation
- Utilities
- Welding
Key Features of the Portwest Cut-Resistant Lightweight HPPE Gloves
- Designed to withstand contact heat temperatures of up to 250°C
- Features a resilient leather palm that provides excellent grip
- Fitted with an HPPE and glass fibre liner that ensures level 5 cut resistance
- Features an inner liner that offers comfort ideal for extended use
- Exceptional abrasion resistance means gloves have high longevity
- Fitted with reinforced protection on the palm and forefinger
- Low linting design reduces risk of product contamination
- Available in a wide range of sizes
Sizing of the Portwest Cut-Resistant Lightweight HPPE Gloves A630
The Portwest Cut-Resistant Lightweight Gloves are available in three sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Documentation for the Portwest HPPE Gloves
| Conformity Statement | Instructions for Use |
 | |
