Microlin Cooper Anti-Needle 5 Level F Cut and Needle-Resistant Gloves
Offering the highest level of cut-resistance, the Microlin Cooper Anti-Needle 5 Level F Cut and Needle-Resistant Gloves are the only gloves you need in the workplace to prevent hand injury when handling nails, metal shards, glass fragments, and any other sharp objects. An impressive 10 layers of stainless steel fabric has been incorporated into the design of these gloves, thus providing excellent puncture resistance to pointed surfaces.
Key Information
- Glove Code: Anti-Needle 5
- EN 388:2016 Rating: 3X44F
- ANSI/ISEA Tested with ASTM F2878 Level 5
- Available Sizes: 8, 9 and 10
- Supplied as a pair
Resistance of the Microlin Cooper Safety Gloves
The Microlin Cooper Safety Gloves have 10 layers of stainless-steel fabric on the palm and fingertips to provide protection to the most vulnerable parts of the hand. Multiple layers of this material not only provides needle resistance, but also adds to their abrasion, tear and cut resistant properties for additional protection. Finally the crinkled latex coating offers excellent grip, even in wet conditions, allowing for safe handling of all tools and therefore preventing injury.
EN 388 (Protection Against Mechanical Risks)
| Test | Result |
| Abrasion | Level 3 |
| Cut | N/A |
| Tear | Level 4 |
| Puncture | Level 4 |
| Blade Cut | Level F |
Other:
- ANSI/ISEA Tested with ASTM F2878 Level 5
Uses of the Microlin Cooper Cut-Resistant Gloves
The Microlin Cooper gloves offer high levels of cut and puncture protection from hazardous objects. Some recommended areas of use include the following:
- Security inspection
- Hospitals
- Council workers
- Agricultural and gardening
- Waste disposal
- Construction sites, recycling areas etc.
Features and Benefits
- Needle resistant gloves for needle, cut and puncture protection
- Maximum level F cut resistance for handling sharp objects and edges
- ANSI needle puncture resistance level 5
- Reinforcement patch between thumb and index finger for extra protection
- Fully waterproof for use in wet conditions
- Excellent grip in wet and dry conditions
- Velcro strap around wrist for secure fastening and a secure fit
- 10 Gauge gloves
- CE-certified for reliable quality and usage
- EN 388:2016
Sizing
The Microlin Cooper Gloves Anti-Needle 5 Gloves come in three sizes. To find the right size for you, measure the length and circumference of your hand as demonstrated in the diagram and match your results to the sizing table provided.
| Size | Circumference (mm) | Length (mm) |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
How Puncture Resistant Are These Gloves?
The Microlin Cooper gloves are lined with 10 layers of stainless-steel fabric, thus providing excellent puncture resistant to pointed surfaces such as needles. With the Microlin Cooper Anti-needle 5 Gloves, you can have total confidence in the protection these gloves offer when dealing with hazardous objects such as nails, wire, glass fragments, metal shards, wood splinters and needles.
What Materials Are the Microlin Cooper Needle Resistant Gloves Made Of?
The Microlin Cooper Needle Resistant Gloves are made up of the following materials:
- Coating: Crinkle latex
- Liner: Cotton, Polyester, Stainless steel fibres
Documentation
.jpg)
.jpg)
.jpg)
[1].jpg)
[2].jpg)