MCR Safety Diamond Dyneema CT1018PU PU-Coated Work Gloves
The MCR Safety Diamond Dyneema CT1018PU PU-Coated Work Gloves are general-purpose work gloves constructed from Diamond Dyneema fibres and palm-coated with polyurethane. Boasting outstanding resistance to mechanical hazards and offering high levels of dexterity and tactile sensitivity, the CT1018PU Gloves are suitable for an incredible range of applications, including automotive work, construction, DIY, manufacturing and carpentry.
Key Information
- Glove Code: CT1018PU
- EN 388:2003 Rating: 4543
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the MCR Safety Diamond Dyneema PU-Coated Gloves
The MCR Safety CT1018PU Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 5 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
Are These Gloves Suitable for Woodworking?
Yes, these gloves are excellent for woodworking due to their high levels of both touch sensitivity and cut resistance. The Dyneema material makes these gloves incredibly strong for their weight and dexterity, making them an excellent pair of woodworking gloves.
Uses of the Diamond Dyneema CT1018PU Gloves
Providing excellent protection against cut and abrasion, with high levels of tactile sensitivity and dexterity, the MCR Safety CT1018PU Work Gloves are suitable for a wide range of applications, including (but not limited to):
- Automotive
- Aerospace
- Construction
DIY - Manufacturing
- Glass
- Steel
- Shipping
- Carpentry
- Gas
- Woodworking
Key Features of the CT1018PU PU-Coated Work Gloves
- Diamond Dyneema shell with polyurethane palm coating
- Excellent resistance to abrasion, cut, tear and puncture
- Lightweight design ensures dexterity and comfort
- Provides a high level of tactile sensitivity
- Anti-bacterial treated to prevent odour
- Washable for increased hygiene and longevity
Sizing of the Diamond Dyneema PU-Coated Work Gloves
The MCR Safety Diamond Dyneema CT1018PU PU-Coated Work Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Palm Circumference (mm) | Palm Length (mm) | Minimum Total Length of the Gloves (mm) |
| Size 7 | 178mm | 170mm | 230mm |
| Size 8 | 203mm | 182mm | 240mm |
| Size 9 | 229mm | 192mm | 250mm |
| Size 10 | 254mm | 204mm | 260mm |
Materials of the Diamond Dyneema CT1018PU Gloves
- Shell Material: Diamond Dyneema
- Coating: Polyurethane
Conformity Statement
Please click the PDF link below to view the conformity statement for these gloves:
