Ejendals Tegera 9113 Insulated All Round Work Gloves
With their warm fleece lining, and water-repellent, windproof and reflective exterior, the Ejendals Tegera 9113 Insulated All Round Work Gloves are suitable even for cold, wet, windy and dark environments. This ergonomically designed glove features a reinforced index finger, seams and fingertips for extra protection as durability, and diamond grip pattern to further improve your grip.
Key Information
- Glove Code: 9113
- EN 388:2003 Rating: 2121
- EN 511 Rating: 22X
- EN 420
- Size Range: 7 - 12
- Supplied as a pair
Resistance of the Ejendals 9113 Insulated Work Gloves
The Ejendals Tegera 9113 Insulated All Round Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
EN 511
| Property | Resistance Level |
| Convective Cold Resistance | Level 2 |
| Contact Cold Resistance | Level 2 |
| Water Permeability | N/A |
Uses of the Tegera 9113 Work Gloves
With a windproof, water-repellent, moisture resistant and reflective exterior, the Tegera 9113 Work Gloves can be used in dark, cold, wet, dirty and oily or greasy settings. It is suitable for the following applications:
- Agricultural work
- Airport work
- Automotive
- Brick handling
- Building and construction
- Carpentry
- Concrete work
- Engineering
- Facilities
- Forestry
- Glass industry
- Hotels, restaurants and cafes
- Installation
- Machine driving
- Maintenance, repair and operation
- Marine work
- Metal fabrication
- Mining
- Oil and gas
- Paper industry
- Petrochemical industry
- Service
- Sheet metal handling
- Soil preparation
- Retail
- Transportation
- Utilities
- Warehouse work
- Wood industry
The 9113 All Round Work Gloves are designated Category II gloves, which makes them suitable for intermediate risks.
Features of the Ejendals Tegera 9113 Insulated All Round Work Gloves
- Ergonomically shaped design for a perfect fit
- Reinforced index finger, seams and fingertips for greater durability
- Chrome-free for reduced skin irritation
- Pre-curved fingers and specially designed thumb for comfort
- Windproof, water-repellent and moisture resistant exterior
- Reflective design for use in dark environments
- Supplied with a diamond grip pattern for improved grip
- Feature an elasticated 360° fastening at the wrist for a secure fit
- Provide protection against:
- Abrasion injuries
- Blisters
- Chapping
- Contact with dirt
- Drying out
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 9113 Gloves
The Tegera 9113 Insulated All Round Work Gloves are available in six sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
| Size 12 | Over 279mm | Over 215mm |
Materials of the Ejendals Tegera 9113
- Palm Material: Microthan
- Back Material: Polyester
- Lining Material: Kevlar fibre
- Grip Pattern: Diamond grip pattern
- Outer Material Specification: Polyurethane, nylon, polyester
- Inner Material Specification: Para-aramid
Documentation for the Ejendals Tegera 9113 Thermal Waterproof Gloves
| Conformity Statement | Instructions for Use |
 | |
