Ejendals Tegera 299 Hi-Vis Thermal Waterproof Outdoor Work Gloves
The Ejendals Tegera 299 Hi-Vis Thermal Waterproof Outdoor Work Gloves are superb outdoor work gloves, boasting a number of features that make them ideal for harsh conditions. Windproof, waterproof, thermally insulated and high visibility, they provide all-round environmental protection for outdoor workers.
Key Information
- Glove Code: 299
- EN 388:2003 Rating: 2121
- EN 511 Rating: 120
- EN 420
- Size Range: 7 - 12
- Supplied as a pair
Resistance of the Ejendals Tegera 299 Windproof Work Gloves
The Ejendals Tegera 299 have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
EN 511
| Property | Resistance Level |
| Convective Cold Resistance | Level 1 |
| Contact Cold Resistance | Level 2 |
| Water Permeability | Level 0 |
Uses of the Tegera 299 Outdoor Work Gloves
With a weather-resistant, comfortable design, the Ejendals 299 are ideal for a variety of outdoor handling tasks. Typical applications include:
- Airport work
- Building work
- Carpentry
- Cold stores
- Concrete work
- Construction
- Decontamination
- Driving
- Fishing
- Freezers
- Gardening
- Hunting
- HVAC installation
- Installation
- Logistics
- Machine operation
- Repair work
- Retail
- Sanitation
- Service
- Soil preparation
- Transport work
The Ejendals Tegera 299 Outdoor Work Gloves are designated Category II gloves, meaning they are suitable for medium-duty applications and intermediate risks.
Key Features of the Ejendals Tegera 299 Work Gloves
- Waterproof, windproof thermal work gloves
- High-visibility colour for maximum safety
- Pre-curved fingers for an ergonomic fit
- Reinforced fingers and thumbs for improved durability
- Ideal for work in outdoor environments
- Extended safety cuff for wrist protection
- Provides protection against:
- Abrasion injuries
- Blisters
- Contact with cold
- Contact with dirt
- Contact with damp and moisture
- Grazes
- Laceration
- Scratches
Ideal for Outdoor Work
Developed to keep workers safe and comfortable on outdoor sites, the Ejendals Tegera 299 are waterproof, windproof and high-visibility. They feature reinforced fingers and thumbs for better durability, and have a Thinsulate lining that provides warmth for winter work without added bulk.
Windproof, waterproof design; ideal for outdoor environments
Sizing of the Ejendals Tegera 299 Waterproof Outdoor Work Gloves
The Ejendals Tegera 299 are available in six different sizes, meaning they should be suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
| Size 12 | Over 279mm | Over 215mm |
Please note that these gloves are designed for a close fit in order to provide dexterity for precision tasks; they feature a palm thickness of between 0.7mm and 0.8mm.
Materials of the Ejendals Tegera 299 Outdoor Work Gloves
- Palm Material: Full-grain cowhide
- Back Material: Neoprene, polyester
- Lining Material: Thinsulate (150g)
- Outer Material Specification: Polyester, leather, natural latex
- Middle Material Specification: Polyethlene
- Inner Material Specification: Polyester
Documentation for the Ejendals Tegera 299 Insulated Work Gloves
| Conformity Statement | Instructions for Use |
 | |
