ATG MaxiCut 44-304 Lightweight Mechanics Work Gloves
Dexterous handling of machine and engine parts in workshops and automotive workshops can take its toll on your hands. If you're fed up of scrubbing grease, dirt and oil off your hands at the end of the workday, you're in the right place.
ATG MaxiCut 44-304 Lightweight Mechanics Work Gloves are incredibly lightweight, allowing you to pick up, replace and interact with intricate material without issue. Their specially treated slender fingertips are grippy and oil-resistant for excellent accurate handling of machine parts, switches and engine components.
What's Included?
- 1 x Pair of Safety Gloves
Safety Standards and Protection Ratings
EN 388: Mechanical Resistance
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 3 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | Level B |
EN 407: Heat-Resistance
EN 407 is a European safety regulation governing the sale of gloves and garments that are resistant to any number of fire, heat and molten related hazards. Please view the table below to find out more:
| Standard | Resistance Rating |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 (100°C) |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Resistance to Small Molten Splashes | N/A |
| Resistance to Large Molten Splashes | N/A |
Suitable Applications and Environments for Use
- Assembly
- Builders
- Cargo Handling
- Construction
- General Handling Application
- Machine Operation
- Maintenance
- Offshore Application
- Oil Handling
- Packaging
- Packing
- Picking
- Roofing
- Scaffolding
- Warehouse
Key Features and Attributes
- Highly oil-resistant nitrile coating effortlessly deflects grease and dirt
- Essential wear for mechanics and automotive professionals
- Contact heat resistant when handling material with a temperature of up to 100°C
- Palm and finger coating enhances grip strength in greasy and oily conditions
- Across-the-board EN 388 protection against mechanical hazards
- Double dipped nitrile coating both seals and enhances grip
- Designed for use in contact with grease, oil, petrol and other slick substances
- Flexible and dexterous design makes for a lightweight glove
- Available in four different sizes for a guaranteed perfect fit
Which Size ATG MaxiFlex Gloves Are Right for Me?
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Size | Palm Circumference | Hand Length |
| Size 7 (Small) | 178mm | 171mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
Safe Contact Heat Handling Up to 100°C
The heat-resistant outer coating allows users to handle material with a temperature not exceeding 100°C for an incredible fifteen seconds. This allows for the safe and secure transfer, disposal and replacement of incredibly hazardous material that can otherwise cause serious injury.
Essential Wear for Mechanics
Automotive professionals come into contact with greasy, dirty and sticky engines, pipes and tools on a daily basis. ATG 44-304 Work Safety Gloves are lightweight and slender, allowing you to seamlessly and accurately interact with tricky parts like nuts, bolts, screws, switches and triggers without taking your gloves off.
What's So Special About a Nitrile Coating?
Nitrile is an incredibly flexible coating that provides additional resistance to oil, fuel and chemicals. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove.
Maximum Abrasion Resistance Rating
Abrasion resistance is often under-looked in terms of EN 388. MaxiCut Oil 44-304 Safety Gloves have been awarded the highest possible Level 4 rating. This indicates they can withstand traffic, constant contact and wearing down better than most.
Which Professions Require It?
In terms of environments, any professional handling, carrying, lifting and transferring material for a living should be using abrasion resistant safety gloves. Moving packaging, lifting boxes and transferring material can quickly wear the hands down, causing fatigue, strain and blistering.
The MaxiCut Promise
ATG's MaxiCut range are highly resistant to a range of common workplace hazards. Please view the video below to see what they can do to protect your hands at work:
Oil-Resistant Coating
Every year, millions are lost on sites because of dropped material. Ensure that oil and grease don't compromise the strength and stability of your grip by using a pair of oil-safe work gloves. Their nitrile coating works tirelessly to absorb harmful and slick substances, keeping your hands dry and grippy for longer.
Double Down on Protection
For ATG, a single coating is not enough. The first layer of nitrile serves to seal the glove, preventing moisture and liquid from penetrating through the glove fabric. The second layer works to enhance grip strength and stability, ensuring that material and products stay in place.
Additional Documentation
