Ansell Ringers R840 Impact-Resistant Handling and Warehouse Gloves
For workplaces with high risks of mechanical injury, such as in warehousing, automotive, packaging, and utilities industries, a pair of Ansell Ringers R840 Impact-Resistant Handling and Warehouse Gloves are a great choice. For optimal protection, these gloves are certified for protection from impact injuries, making them ideal for handling heavier materials. A range of Ansell technologies have been used to significantly improve the fit and function of these gloves.
Key Information
- Glove Codes
- Ringers-R840/8
- Ringers-R840/9
- Ringers-R840/10
- EN 388 (4131AP)
- EN 407 (X1XXXX)
- EN1186
- Available Sizes: 8 - 10
- Supplied as a pair
Resistance of the Ansell Ringers R840 Gloves
These gloves have been tested to European Standards of safety to ensure high levels of performance. The results are as follows:
EN388 (Mechanical Resistance)
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | Level A |
| Impact Resistance | Level P |
EN407 (Resistance to Heat)
| Hazard | Resistance Level |
| Burning Behaviour | N/A |
| Contact Heat | Level 1 (100°C) |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Small Splashes of Molten Metal | N/A |
| Large Splashes of Molten Metal | N/A |
Food-Safe Design
These gloves comply with EC-Regulation 1935/2004 and EC-regulations 2023/2006 related to good manufacturing practises for materials and articles intended to come into contact with foodstuffs.
Uses of the Ansell Ringers Impact-Resistant Gloves
These Ansell Ringers gloves are ideal for a range of handling tasks, and for use in industries with high risk of mechanical injury. Suitable applications for these gloves include (but are not limited to):
- Warehousing
- General Handling
- Packaging
- Picking parts and accessories
- Driving fork lifts & similar vehicles
- Light assembly
- Logistics
- Automotive
- Manufacturing
- Construction
- Food processing
- Food handling
- Oil & gas
- Utilities
Key Features and Benefits
- Pair of impact-resistant gloves
- Ideal for various warehousing and handling tasks
- Food-safe enables hygienic contact with a wide range of foodstuffs
- Designed for optimal comfort, with an ergonomic design that helps to reduce hand fatigue during prolonged use
- Impact-resistant design reduces risk of injury during high-impact job tasks
- Thermo-plastic rubber blend provides impact-resistance
- Ansell Grip Technology significantly enhances grip for reduced risk of slippage
- PU thumb-crotch reinforcement improves durability for a prolonged glove lifespan
- FORTIX Technology offers up to 20% more abrasion resistance for a prolonged glove lifespan
- ERGORFORM Technology provides a comfortable fit that helps to reduce hand fatigue
- ZONZ Comfort-Fit Technology helps to reduce stress in key areas of the hand
- Level 1 contact-heat resistance enables brief, intermittent contact with materials up to 100°C
- Available in a range of sizes so you can find a good fit for your hands
Sizing of the Ansell Ringers Gloves
The Ansell Ringers R840 Gloves are available in a range of sizes that should be suitable for most adult users. To discover the right size for you, start by measuring the length of your hands and the circumference of your palm at the knuckle (as seen below). Once you have these measurements, you can compare them to the sizing table below to identify your glove size.
| Size | Palm Circumference | Hand Length |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Ansell Technologies
These gloves have been designed using various Ansell technologies to improve both fit and function. These include:
ERGOFORM
ERGOFORM Technology is used to construct a more comfortable glove, and reduce the musculoskeletal strains that can cause injuries. This technology also gives the gloves an excellent range of motion for optimal dexterity.
To find out more about ERGOFORM Technology, see the video below:
ZONZ Comfort-Fit
ZONZ Comfort-Fit technology is a patented knitting technology that works to reduce stress on key areas of the hand, and improve glove fit and freedom-of-movement. This helps to reduce hand strain by minimising the tension caused by repetitive motions.
To find out more about ZONZ Technology, see the video below:
FORTIX
FORTIX is an Ansell patented abrasion-resistant technology that helps to significantly extend a glove's lifespan. The technology involved applying a resilient and breathable nitrile foam coating to a knitted glove. To find out more about how this works, see the video below:
Ansell Grip
The Ansell Grip Technology is a coating treatment designed to improve grip on dry, oily, and wet components to reduce the risk of slippage and accidents. To find out more about how this technology works, see the below video:
Materials
- Liner: Nylon and Spandex
- Coating: Nitrile
Additional Documentation
