Ansell 11-849 Nitrile-Dipped Abrasion-Resistant Grip Gloves
Improve personal safety in a wide range of industrial work environments with the Ansell 11-849 Nitrile-Dipped Abrasion-Resistant Grip Gloves. These flexible and ergonomically designed gloves reduce the risk of injury when handling coarse materials, or during brief contact with hot components. Various Ansell technologies have been used in the design of this glove to significantly enhance grip, fit, flexibility, comfort, and durability.
Key Information:
- Glove Codes:
- 11-849/8
- 11-849/9
- 11-849/10
- EN388: 4121A
- EN407: X1XXXX
- EN 1186
- Available Sizes: Size 8 - 10
- Supplied as a pair
Resistance Of the Nitrile-Dipped Grip Gloves
These gloves have been to tested to European Standards of safety to ensure high performance levels. The results are as follows:
EN388 (Mechanical Resistance)
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | Level A |
EN407 (Resistance to Heat)
| Hazard | Resistance Level |
| Burning Behaviour | N/A |
| Contact Heat | Level 1 (100°C) |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Small Splashes of Molten Metal | N/A |
| Large Splashes of Molten Metal | N/A |
Please Note: These gloves offer contact-heat resistant for intermittent handling, up to 15 seconds at a time.
EN1186 (Food-Safe Design)
These gloves comply with EC Regulation 1935/2004 and EC Regulation 2023/2006 related to good manufacturing practises related for materials and articles intended to come into contact with foodstuffs.
Uses of the Abrasion-Resistant Gloves
These gloves are useful for job-tasks in a range of industrial industries, offering good levels of mechanical protection to help prevent common workplace injuries. Suitable applications for these gloves include (but are not limited to):
- Automotive
- Automotive aftermarket (e.g., car detailing)
- Machinery and equipment operation and maintenance
- Transport and logistics
- Warehousing
- Shipping (loading and unloading)
- General handling
- Manual handling
- Cargo handling
- Handling wet or oily components
- Intermittent and brief hot component handling
- Assembly line picking
- Assembling components and parts
- Packing
- Food handling
- Food packing
Key Features and Benefits
- Pair of 18-gauge gloves for various industrial tasks
- Can be used during a range of handling, warehousing, packaging, shipping, maintenance, and assembly tasks
- Food-safe design enables hygienic and secure handling of various foodstuffs
- Ansell Grip Technology provides excellent grip on wet, oily, and dry components and materials
- Features a high level of abrasion resistance for secure handling of coarse or rough materials
- Can be used for intermittent contact with materials up to 100°C for 15 seconds maximum
- FORTIX Technology enhances grip, offering up to twice the grip strength
- FORTIX also offers up to 20% better durability
- Fully-dipped nitrile construction enhances grip, durability, and abrasion-resistance
- Knit-wrist cuff helps to keep hands free from dirt and debris
- Offers protection from light scratches for enhanced safety in low-risk environments
- Silicone-free design reduces the risk of contact contamination
- Dermatest and Oeko-Tex certified for skin-friendly materials that are free from harmful substances
- Shaped to natural hand contours for optimal comfort
- Machine washable at 40°C for easy ongoing hygiene maintenance
- Available in a range of sizes suitable for most adult users
Sizing of the Grip Gloves
The Ansell 11-849 Gloves are available in a selection of sizes suitable for most adult users. If you're not sure which size is right for you, measure the length of your hand and the circumference of your palm at the knuckle (as seen below). Once you have these measurements, you can compare them to the below sizing table to identify the best size for your hands.
| Size | Palm Circumference | Hand Length |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Ansell Technologies
Ansell have developed a range of technologies that can enhance the comfort, function, and durability of their gloves. Technologies used on the HyFlex 11-849 Gloves include:
Ansell Grip Technology
Ansell Grip Technology is designed to improve glove grip, reducing the effort and force needed to hold oily, wet, and dry components. To find out more about how this works, see the video below:
ERGOFORM
This design technology is used to construct a more comfortable glove, helping to ease musculoskeletal strains that could lead to injury and hand fatigue. It is also used to enhance range-of-motion for better dexterity while wearing the gloves. To find out more about ERGOFORM Technology, see the below video:
FORTIX
The FORTIX Technology patented by Ansell includes a nitrile-foam coating over knitted gloves to create a durable, breathable, and flexible glove with enhanced grip. Not only does FORTIX aim to make gloves more comfortable, but also to prolong their lifespan for long-term protection. To find out more about this technology, see the below video:
Materials
- Liner: Spandex and Nylon
- Coating: Foam Nitrile
Additional Documentation
