Ansell Edge 40-400 3/4 Coated Foam Nitrile Work Gloves
With slight oil resistance and a resilient 3/4 nitrile coating, the Ansell Edge 40-400 3/4 Coated Foam Nitrile Work Gloves perform excellently in tough, mechanical environments. Fitted with a flexible knitwrist, the 40-400 Gloves ensure long-lasting comfort that can withstand the test of time.
Key Information
- Glove Codes:
- 40-400/8
- 40-400/9
- 40-400/10
- EN 388:2003 Rating: 4121
- EN 388:2016 Rating: 4121A
- EN 420:2003
- Size Range: Size 8 - Size 10
- Supplied as a pair
Resistance of the Ansell 40-400 3/4 Coated Nitrile Work Gloves
The Edge 40-400 3/4 Coated Foam Nitrile Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | A |
Uses of the Ansell 40-400 3/4 Coated Nitrile Work Gloves
The Ansell Edge Gloves are suitable for a wide range of mechanical industries that range from assembly, to maintenance. They are suitable for use inside and outside, in dry, wet and oily conditions, and in dirty and clean environments. Some industries where these gloves are recommended include:
- Assembly
- Automotive
- Building
- Construction
- Engineering
- Fabrication
- Local authorities
- Logistics
- Machinery use
- Maintenance
- Manual handling
- Mechanics
- Oil and gas
- Recycling
- Scaffolding
- Shipping
- Utilities
- Warehousing
Key Features of the Edge 40-400 Foam Nitrile Gloves
- Features ultra strong nitrile construction that ensures mechanical protection
- Designed to fit close to the hand to enhance dexterity
- Features a knitwrist that ensures a secure fit
- Fitted with a 3/4 nitrile coating that provides grip
- Porous design channels oil away from glove surface
- Ergonomically designed to ensure comfort
- Supplied with a cotton interlock liner that improves comfort
- Antistatic and latex-free construction makes gloves safer
- Outstanding abrasion resistance means gloves are long-lasting and durable
- Available in three sizes that should suit most users
Sizing of the Ansell 40-400 Foam Nitrile Gloves
The Ansell Foam Nitrile Gloves are available in three sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Documentation for the Ansell Edge Nitrile 3/4 Coated Gloves
| Conformity Statement | Instructions for Use |
 | |
