Towa ActivGrip Nitrile Coated Oil Resistant CJ-568 Gloves
Working with oily or greasy materials is an easy way of reducing your productivity, particularly if you aren't able to maintain a firm grip on the gloves. The Towa ActivGrip Nitrile Coated Oil Resistant CJ-568 Gloves are made with a double nitrile coating on the palms, fingers and thumbs for excellent grip in wet, dry and oily environments. The coating also helps prevent the penetration of liquids so your hands remain clean and dry throughout use.
Key Information
- Product Code: CJ-568
- EN 388: 2003 Rating: 4122
- Available Sizes: 6 - 11
- Supplied as a pair
Resistance of the CJ-568 Protective Gloves
The Towa ActivGrip CJ-568 Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 2 |
Uses of the Nitrile Coated Oil Resistant Gloves
The Towa ActivGrip Nitrile Coated Gloves are designed to provide all-round performance in a wide range of applications performed in dry, wet and oily conditions. This includes the following:
- Assembly line work
- Assembly work
- Automotive work
- Carpentry work
- Component handling
- Construction work
- Debris handling
- Decorating work
- DIY work
- Fine handling
- Grip work
- Industrial work
- Inspection work
- Line work
- Logistics work
- Machine operation
- Maintenance work
- Manual handling
- Oil handling
- Packaging work
- Packing work
- Product inspection
- Public utilities
- Recycling work
- Stock work
- Utilities work
- Warehouse work
- Wet work
These are designated Category II gloves, meaning they should be suitable for most medium-weight tasks. The gloves are made for use in dry, wet and oily conditions. Providing excellent protection against abrasions, they should be suitable when abrasive hazards are present.
Key Features and Benefits
- Provides maximum all-round performance
- Ideal for use in dry, oily and wet conditions
- Provides excellent dexterity and oily resistance
- Features a nitrile palm and full thumb coating for grip
- Designed using MicroFinish technology for ultimate grip
- Twice coated on the palms, fingers and thumbs to reduce liquid penetration
- Seamless 13 gauge nylon liner is ergonomic in design
- Maximises comfort and minimises hand fatigue
- Includes a breathable open back to reduce perspiration
Learn More About MicroFinish Technology
Find out more about the MicroFinish technology used in these gloves by watching the video below. This is a patented coating technology that provides excellent grip.
Sizing of the Towa ActivGrip Work Gloves
The Nitrile Coated Oil Resistant Gloves are available in six sizes to fit most hands. Please measure the circumference of your hand around the knuckles (excluding your thumb) with your palm open and your fingers together. Next, measure the length of your hand from the tip of your middle finger to your wrist.

Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Conformity Statement
