Towa ActivGrip Latex Coated Water Resistant XA-326 Gloves
Your efficiency is dependent on your ability to grip objects, but this can be difficult in wet or dirty environments. The Towa ActivGrip Latex Coated Water Resistant XA-326 Gloves are designed with a double latex coating on the back and front of the gloves so they provide outstanding protection against soil, dirt and water penetration.
Key Information
- Product Code: XA-326
- EN 388: 2003 Rating: 2131
- Available Sizes: 6 - 11
- Supplied as a pair
Resistance of the XA-326 Work Gloves
The Latex Coated XA-326 Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 1 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 1 |
Uses of the Towa Water Resistant Gloves
As the Latex Coated Water Resistant Gloves help protect you in wet and dry environments, they are suitable for a wide range of handling tasks. This includes the following:
- Agricultural work
- Assembly line work
- Assembly work
- Component handling
- Farming work
- Fine handling
- Gardening work
- Greenkeeping work
- Grip work
- Industrial work
- Inspection work
- Landscaping work
- Line work
- Local authorities work
- Logistics work
- Maintenance work
- Manual handling
- Outdoor work
- Packaging work
- Packing work
- Product inspection
- Shipping work
- Stock work
- Warehouse work
- Wet work
These are designated Category II gloves, meaning they should be suitable for most medium-weight tasks. The gloves offer moderate protection against mechanical hazards and excellent resistance against the penetration of soil, dirt and water. As a result, they can be used in a number of settings where other hazards are not present.
Key Features and Benefits
- Provides all-round performance in wet and dry conditions
- Fully coated with latex for outstanding grip
- Double dipped palm and back to protect against liquids
- Designed with a seamless 13 gauge liner
- Ergonomic design minimises hand fatigue
- Ideal for use in non-hazardous chemical environments
Sizing of the ActivGrip Latex Coated Gloves
The Towa ActivGrip Work Gloves are available in six sizes to fit most hands. Please measure the circumference of your hand around the knuckles (excluding your thumb) with your palm open and your fingers together. Next, measure the length of your hand from the tip of your middle finger to your wrist.

Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Conformity Statement
