Mechanix Wear Specialty High Dexterity Work Gloves
The Mechanix Wear Specialty High-Dexterity Work Gloves have been designed to provide protection for minimal-risk manual tasks while retaining the levels of control and dexterity of bare hands. This is achieved through the use of an ergonomic design with the inclusion of 0.5mm AX-Suede on the palms and flex inserts in the fingers. In addition to providing protection without inhibiting control or movement, these gloves feature a breathable back to keep hands cool, dry and comfortable.
Key Information
- EN 388:2003 Rating: 1121
- Available Sizes: Small - XX-Large
- Supplied as a pair
Resistance of the Mechanix Wear Specialty Work Gloves
The Mechanix Wear Specialty High-Dexterity Work Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 1 |
Cut Resistance | Level 1 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 1 |
Uses of the Specialty High-Dexterity Work Gloves
Designed to provide a high level of dexterity, the Specialty Gloves are perfect for low-risk manual tasks that require hand protection that doesn't inhibit hand movement or prevent precision. Suitable uses include (but are not limited to):
- Assembly
- Automotive work
- Electrical work
- Maintenance and repair
- Manufacturing
- Racing
Key Features of the Mechanix Wear Specialty Gloves
- Mechanix Wear's most dexterous work gloves
- High dexterity 0.5mm AX-Suede palm for precision
- Anatomically-designed for optimal dexterity
- Hourglass finger design eliminates material overlap
- Breathable TrekDry material keeps hands cool and dry
- Thermoplastic Rubber closure for a secure fit
- Flex inserts to improve finger mobility
- Machine washable for increased hygiene and longevity
Sizing of the Specialty High-Dexterity Work Gloves
The Mechanix High-Dexterity Work Gloves are available in sizes Small, Medium, Large, Extra Large and XX-Large. Please measure your finger length from your thumb crotch to the tip of your middle finger, and your palm width at the widest point (as shown below), then refer to the sizing details in the table below. If your measurements fall between two sizes, we recommend choosing the smaller of the two for a snug fit.


Glove Size | Finger Length (cm) | Palm Width (cm) |
Small | 12.3 - 13cm | 6.5 - 7.5cm |
Medium | 13 - 13.8cm | 7.5 - 8.5cm |
Large | 13.8 - 14.5cm | 8.5 - 9.8cm |
Extra Large | 14.5 - 15.2cm | 9.8 - 11cm |
XX-Large | 15.2 - 15.9cm | 11 - 12.2cm |
Conformity Statement for the Mechanix Specialty High-Dexterity Gloves
