Mechanix Wear M-Pact Coyote Impact-Resistant Work Gloves
Designed to provide protection to the entire hand, the Mechanix Wear M-Pact Coyote Impact-Resistant Work Gloves are fitted with impact-absorbing knuckle and finger guards, and a shock-absorbing palm. Featuring a durable synthetic leather palm and dual-layer fingertip reinforcement, these gloves provide durable protection suitable for a wide range of applications, including construction, heavy equipment operation, maintenance, automotive work and home improvement.
Key Information
- EN 388:2003 Rating: 3121
- Available Sizes: Small - Extra Large
- Supplied as a pair
Resistance of the M-Pact Impact-Resistant Gloves
The Mechanix Wear M-Pact Impact-Resistant Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 3 |
Cut Resistance | Level 1 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 1 |
Uses of the Mechanix Wear M-Pact Coyote Work Gloves
Providing protection against mechanical hazards and impact, the Mechanix M-Pact Gloves are suitable for a wide range of tasks, including (but not limited to):
- Automotive repair
- Construction
- Heavy equipment operation
- Law enforcement
- Logistics
- Military
- Search and rescue
- Shooting sports
- Transportation
Key Features of the Mechanix Wear M-Pact Gloves
- Dual-layer internal fingertip construction for increased protection
- Impact guard shields the back of the hand from impact
- Full-length fingertip protection reduces impact and pinching injuries
- TrekDry material keeps hands cool, dry and comfortable
- Durable synthetic leather palm for increased protection
- Palm reinforced with Armortex for increased grip
- D3O palm padding absorbs and dissipates shock
- Flexible Thermoplastic Rubber closure for a secure fit
- Machine washable for increased hygiene and longevity
Sizing of the Mechanix Wear M-Pact Gloves
The Mechanix Wear M-Pact Coyote Impact-Resistant Gloves are available in sizes Small, Medium, Large and Extra Large. Please measure your finger length from your thumb crotch to the tip of your middle finger, and your palm width at the widest point (as shown below), then refer to the sizing details in the table below. If your measurements fall between two sizes, we recommend choosing the smaller of the two for a snug fit.


Glove Size | Finger Length (cm) | Palm Width (cm) |
Small | 12.3 - 13cm | 6.5 - 7.5cm |
Medium | 13 - 13.8cm | 7.5 - 8.5cm |
Large | 13.8 - 14.5cm | 8.5 - 9.8cm |
Extra Large | 14.5 - 15.2cm | 9.8 - 11cm |
Conformity Statement for the Mechanix M-Pact Work Gloves
