MCR Safety General Purpose GP1001SL Latex-Coated Work Gloves
  Zoom

MCR Safety General Purpose GP1001SL Latex-Coated Work Gloves

  • Cotton/polyester shell with full latex coating
  • Excellent grip in wet and dry conditions
  • Good resistance to abrasion and tear
  • Price is per pair of gloves
Glove Size:  
Available, dispatched within 1-3 days  

Available, dispatched within 1-3 days

Brand:  MCR Safety
Cut Resistance Level:  Level 1
Standard:  EN 388

MCR Safety General Purpose GP1001SL Latex-Coated Work Gloves

The MCR Safety General Purpose GP1001SL Latex-Coated Work Gloves are general-purpose work gloves featuring a latex coating across the entire outer surface for enhanced resistance to mechanical hazards. Providing excellent grip in wet and dry conditions, and flexible enough to enable good dexterity, the GP1001SL Gloves are suitable for a wide range of low- to medium-risk tasks, including construction, logistics, maintenance, agriculture, landscaping and DIY.

Key Information

  • Glove Code: GP1001SL
  • EN 388:2016 Rating: 3131X
  • Size Range: 7 - 10
  • Supplied as a pair

Resistance of the MCR Safety GP1001SL Work Gloves

The General Purpose GP1001SL Latex-Coated Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below: 

EN 388

Property Resistance Level
Abrasion Resistance Level 3
Cut Resistance Level 1
Tear Resistance Level 3
Puncture Resistance Level 1
ISO Cut Resistance Level X

Uses of the GP1001SL Latex-Coated Work Gloves

Providing good grip in wet and dry conditions with a good level of dexterity and abrasion resistance, the GP1001SL Gloves are suitable for the following applications:

  • Agriculture
  • Construction
  • DIY
  • Landscaping
  • Logistics
  • Maintenance
  • Manual handling
  • Warehousing

Key Features of the MCR Safety GP1001SL Work Gloves

  • Cotton/polyester shell with full latex coating
  • Good resistance to abrasion and tear
  • Flexible coating enables good dexterity
  • Excellent grip in both wet and dry conditions

Sizing of the MCR Safety General Purpose Work Gloves

The MCR Safety GP1001SL Work Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Indications of Where to Measure Your Hand

Size Palm Circumference (mm) Palm Length (mm) Minimum Total Length of the Gloves (mm)
Size 7 178mm 170mm 230mm
Size 8 203mm 182mm 240mm
Size 9 229mm 192mm 250mm
Size 10 254mm 204mm 260mm

Materials of the MCR Safety GP1001SL Gloves

  • Shell Material: Cotton/polyester
  • Coating: Latex

Conformity Statement

Please click the PDF link below to view the conformity statement for these gloves:

Conformity Statement

Be the first to Write a Review for this item!

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 0597 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE