MCR Safety Diamond Dyneema Nitrile Air CT1009NA Work Gloves
Constructed from Diamond Dyneema 3 – an extremely strong, yet remarkably lightweight fibre – the MCR Safety Diamond Dyneema Nitrile Air CT1009NA Work Gloves offer excellent protection against mechanical hazards, along with high levels of comfort, dexterity and sense of touch. Thanks to Nitrile Air coating on the palms, the CT1009NA also offer good grip in wet, dry and oily conditions, making them suitable for a wide array of tasks.
Key Information
- Glove Code: CT1009NA
- EN 388:2003 Rating: 4342
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the MCR Safety Diamond Dyneema Work Gloves
The MCR Safety Nitrile Air CT1009NA Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 3 |
Tear Resistance | Level 4 |
Puncture Resistance | Level 2 |
Uses of the MCR Safety CT1009NA Work Gloves
Offering good protection against mechanical hazards, with excellent dexterity and tactile sensitivity, the Diamond Dyneema Nitrile Air Work Gloves are suitable for a wide range of applications, including (but not limited to):
- Aerospace
- Assembly
- Automotive
- Construction
- Glass
- Logistics
- Machinery and equipment
- Maintenance
- Manufacturing
- Steel
- Warehousing
Key Features of the Diamond Dyneema CT1009NA Work Gloves
- Strong and lightweight Diamond Dyneema 3 liner
- Nitrile Air coating on the palms increases resistance
- Radiate heat away from the hands for increased comfort
- High levels of dexterity and tactile sensitivity
- Excellent grip in wet, dry and oily conditions
- Antibacterial treatment keeps hands fresher for longer
Sizing of the MCR Safety CT1009NA Work Gloves
The MCR Safety Diamond Dyneema Nitrile Air CT1009NA Work Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Size | Palm Circumference (mm) | Palm Length (mm) | Minimum Total Length of the Gloves (mm) |
Size 7 | 178mm | 170mm | 230mm |
Size 8 | 203mm | 182mm | 240mm |
Size 9 | 229mm | 192mm | 250mm |
Size 10 | 254mm | 204mm | 260mm |
Materials of the MCR Safety CT1009NA Work Gloves
- Shell Material: Diamond Dyneema 3
- Coating: Nitrile Air
Conformity Statement
Please click the PDF link below to view the conformity statement for these gloves:
