Ejendals Tegera 9901 All Round Work Gloves
Medium work gloves need to be hard-wearing, as well as supple and comfortable to wear. The Ejendals Tegera 9901 All Round Work Gloves are durable, chrome-free synthetic leather gloves with breathable Polythene fibre, pre-curved fingers and a specially designed thumb that guarantee a comfortable fit.
Key Information
- Glove Code: 9901
- EN 388:2003
- EN 420
- Size Range: 8 - 12
- Supplied as a pair
Resistance of the Ejendals 9901 Work Gloves
The Ejendals 9901 All Round Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 1 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 1 |
Uses of the Tegera 9901 Gloves
Designed for use in both clean and dirty, as well as dry environments, the Tegera 9901 Gloves are suitable for a broad range of applications. These include:
- Agricultural work
- Airport work
- Building and construction
- Carpentry
- Concrete work
- Engineering
- Facilities
- Forestry
- Hotels, restaurants and cafes
- Machine operation and driving
- MRO (Maintenance, repair and operations)
- Paper industry
- Retail
- Sanitation
- Service
- Soil preparation
- Tiling
- Transportation
- Utilities
- Warehouse work
- Wood industry
The Tegera 9901 All Round Work Gloves are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks. Gloves are placed in this category when the risk is not classified as minimal or irreversible.
Key Features of the Ejendals Tegera 9901 All Round Work Gloves
- Chrome-free synthetic leather gloves with soft Polythene fibre
- Pre-curved fingers and a specially designed thumb for a perfect fit
- Suitable for a variety of medium work applications
- Featuring an elasticated 360° fastening at the wrist
- Supplied in a yellow/black design
- Provide protection against:
- Abrasion injuries
- Blisters
- Chapping
- Chrome allergy
- Contact with dirt
- Drying out
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 9901 Gloves
The Tegera 9901 All Round Work Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Size | Circumference (mm) | Length (mm) |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Size 12 | Over 279mm | Over 215mm |
Documentation for the Ejendals 9901 Gloves
Conformity Statement | Instructions for Use |
 |  |