Ejendals Tegera 8180 PVC Chemical Resistant Gloves
When dealing with dangerous substances, it is important to use proper protective gear that is guaranteed to keep you safe from the many potential hazards. The Ejendals Tegera 8180 PVC Chemical Resistant Gloves are comfortable and flexible safety gloves, designed to protect against various chemicals, as well as abrasion injuries.
Key Information
- Glove Code: 8180
- EN 388:2003 Rating: 2000
- EN 374 - 2
- EN 374 - 3
- EN 420:2003
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Ejendals 8180 PVC Chemical Resistant Gloves
The 8180 PVC Chemical Resistant Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 0 |
Tear Resistance | Level 0 |
Puncture Resistance | Level 0 |
EN 374 - 2
EN374-2 resistance to penetration by micro-organisms.
EN 374 - 3
EN374-3 Resistance to chemical hazards (permeation).
Uses of the Tegera 8180 Chemical Resistant Gloves
The Tegera 8180 PVC Gloves can be used in microbiological risk environments, wet, moist and dirty environments. This makes them suitable for the following work applications:
- Care work
- Cleaning
- Decontamination
- Facilities
- Hotels, restaurants and cafes
- Kitchen work
- Sanitation
- Service industry
The 8180 PVC Chemical Resistant Gloves are designated Category III gloves, which means that they are designed to protect against the highest levels of risk, such as highly corrosive acids. These are gloves of complex design, suitable for irreversible or mortal risks.
Features of the Ejendals 8180 PVC Chemical Resistant Gloves
- Protect against an array of chemical hazards
- Comfortable and flexible design for easy use
- Supplied in a flock-lined blue design
- Feature a diamond grip pattern for improved handling
- Provide protection against:
- Contact with damp
- Contact with dirt
- Contact with moisture
Sizing of the Ejendals Tegera 8180 Gloves
The Ejendals Tegera 8180 Gloves are available in four sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Materials of the Ejendals Tegera 8180
- Material: PVC (vinyl)
- Thickness: 0.45mm
- Inside: Flock-lined
- Grip Pattern: Diamond grip pattern
Chemical Resistance Guide

Documentation for the Ejendals Tegera 8180 Gloves
Conformity Statement | Instructions for Use |
 |  |