Ejendals Tegera 8140 Latex Chemical Resistant Gloves
Chemical resistant gloves need to protect from permeation, penetration and degradation. The Ejendals Tegera 8140 Latex Chemical Resistant Gloves are designed to protect from a range of hazardous substances, while maintaining a high level of abrasion and tear resistance.
Key Information
- Glove Code: 8140
- EN 388:2003 Rating: 1010
- EN 374 - 2
- EN 374 - 3
- EN 420:2003
- Size Range: 6 - 10
- Supplied as a pair
Resistance of the Ejendals 8140 Latex Chemical Resistant Gloves
The Tegera 8140 Chemical Resistant Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 1 |
Cut Resistance | Level 0 |
Tear Resistance | Level 1 |
Puncture Resistance | Level 0 |
EN 374 - 2
EN374-2 resistance to penetration by micro-organisms.
EN 374 - 3
EN374-3 Resistance to chemical hazards (permeation).
Uses of the Tegera 8140 Latex Chemical Resistant Gloves
The Tegera 8140 Latex Gloves can be used in wet, moist and dirty environments. This makes them suitable for the following applications:
- Agriculture
- Care work
- Cleaning
- Decontamination
- Fishing (industrial)
- Fishing (recreational)
- Food handling
- Food processing
- Kitchen work
- Sanitation
- Service industry
The Tegera 8140 Latex Chemical Resistant Gloves are designated Category III gloves, which means that they are designed to protect against the highest levels of risk, such as highly corrosive acids. These are gloves of complex design, suitable for irreversible or mortal risks.
Features of the 8140 Latex Chemical Resistant Gloves
- Ensure a high degree of protection against chemical hazards
- Feature a diamond grip pattern for improved handling
- Suitable for contact with foodstuffs
- Supplied in a flock-lined blue design
- Provide protection against:
- Contact with damp
- Contact with dirt
- Contact with moisture
Sizing of the 8140 Latex Chemical Resistant Gloves
The 8140 Latex Chemical Resistant Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Materials of the Ejendals Tegera 8140
- Material: Latex
- Thickness: 0.38mm
- Inside: Flock-lined
- Grip Pattern: Diamond grip pattern
Chemical Resistance Guide

Documentation for the Ejendals Tegera 8140 Gloves
Conformity Statement | Instructions for Use |
 |  |