Ejendals Tegera 145 Thermal Work Mittens

Ejendals Tegera 145 Thermal Work Mittens

  • Thermal mittens for outdoor and winter work
  • Winter lining of artificial fur for excellent insulation
  • Reflector for use in low-light conditions
  • Price shown is per pair of gloves
In stock now  

In stock now

Our Price:  £19.16(Exc VAT)(£22.99 Inc 20% VAT)

Brand:  Ejendals Tegera

Ejendals Tegera

Ejendals Tegera 145 Thermal Work Mittens

For handling in cold environments where dexterity is not essential, work mittens are the ideal solution. By grouping the fingers together, a mitten insulates more effectively, enabling work to be undertaken in cold conditions for extended periods. 

The Ejendals Tegera 145 Thermal Work Mittens have been developed with a durable, hardwearing design with a winter lining of artificial fur for superb insulation. Made with water-repellent leather, they also help to keep the hands dry, making them ideal for outdoor work.

Key Information

  • Glove Code: 145
  • EN 420
  • Size Range: Size 10 only
  • Supplied as a pair

Uses of the Ejendals Tegera 145 Mittens

With a tough, water repellent design, the Tegera 145 are ideal for handling tasks in cold and/or wet environments where high levels of dexterity are not required. Typical applications include:

  • Fishing
  • Hunting
  • Police work
  • Retail
  • Security
  • Transportation

The Ejendals Tegera 145 Thermal Work Mittens are designated Category I gloves, making them suitable for minimal risks only. Designed specifically for use in cold environments, they also provide a degree of protection against the ingress of water.

Key Features of the Ejendals Tegera 145 Thermal Work Mittens

  • Thermal mittens for outdoor and winter work
  • Winter lining of artificial fur for excellent insulation
  • Water-repellent leather for use in wet environments
  • Reflector for use in low-light conditions
  • Provides protection against:
    • Abrasion injuries
    • Blisters
    • Contact with cold
    • Contact with damp
    • Contact with dirt
    • Grazes
    • Lacerations
    • Scratches

Sizing of the Ejendals Tegera 145 Insulated Mittens

The Tegera 145 Thermal Mittens are available in a single size only. In order to determine if this is suitable for you, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

EN 420 Hand Measurement Chart

Size Circumference (mm) Length (mm)
Size 10 254mm 204mm

Please note that the mitten design means that these gloves are designed to fit less closely than most work gloves, and as such users with measurements smaller than those stated in the table above may find that they are suitable. These mittens have a palm thickness of between 0.8mm and 1mm.

Materials of the Ejendals Tegera 145 Thermal Mittens

  • Palm Material: Full grain goatskin
  • Back Material: Full grain goatskin
  • Lining Material: Artificial fur
  • Outer Material Specification: Leather (99%), natural latex (3%) 
  • Inner Material Specification: Polyester (100%)

Documentation for the Ejendals Tegera 145 Heavy Work Gloves

Conformity Statement Instructions for Use
Download the Conformity Statement for the Ejendals Tegera 145 Download the Instruction Manual for the Ejendals Tegera 145

Be the first to Write a Review for this item!

Ejendals Sustainability Goals

Here at WorkGloves.co.uk we take pride in sourcing sustainable and environmentally friendly suppliers. Ejendals are no different, with a company policy that puts being part of a global community at its heart. This policy includes not just a focus on reducing carbon emissions, increasing recycling and minimising waste, but working to reduce the impact of solvents used in gloves based on the current knowledge available.

A Focus on a Better World

Ejendals want to limit their environmental impact in order to make the world better for future generations. Their work includes:

  • Imposing environmental requirements on those who deliver products, packaging and services
  • Reducing the amount of chemicals used in the manufacturing process
  • Ensuring that staff are educated on the impact of the materials used
  • Manufacturing high quality products to ensure less waste
  • Ship as much as possible to reduce aeroplane emissions
  • Minimising waste and recycling materials

Ejendals are also certified in accordance with environmental management system ISO 14001. For a full breakdown of their sustainability goals, see the link below:

Ejendals Sustainability Goals


This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 0597 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE